Indibeau Pico laser

Indibeau Pico laser

  • Productcode: LASERPICO

Log in om prijzen te zien

enkel op bestelling, levertermijn 2-4weken

1. Working Principle
Using the light blasting effect, the high-intensity laser penetrate the epidermis and can reach the
pigment clusters in the dermis layer. Because the energy has a short time of action and the energy
is extremely high, the pigment clusters will quickly expand and explode after absorbing the high
energy in an instant. After the particles are swallowed by macrophages, excreted, and the pigment
gradually fades and disappears.
The picosecond laser with ultra-short pulse width can effectively produce photo-mechanical
effects and break the pigment particles into small fragments
Compared with nano-scale Q-switched laser, picosecond laser only needs lower energy to achieve
the effect
It takes less number of treatment courses to achieve better treatment effect
Stubborn green and blue tattoos can also be effectively removed
Treated but incomplete tattoo removal, picosecond laser can also treat
In the mechanism of pigment particle destruction, there are mainly photothermal and
photomechanical effects. The shorter the pulse width, the weaker the effect of converting light into
heat. Instead, the photomechanical effect is used, so picoseconds can effectively crush the pigment
particles, Resulting in better pigment removal.

2. Application
Remove chloasma, freckles, age spots, brown mole spots, acne marks and other endogenous
pigments, wash eyebrows, tattoos, moles, birthmarks, remove Ota moles, etc.

532nm: effective for tattoos(red and brown), reddish pigments and age spots.
1064nm: effective in treating endogenous pigmented skin lesions. Wash eyebrows, tattoos(dark
and blue) and dark pigments, remove moles.
1320nm: shrink pores, whiten skin and lighten spots. Has obvious effects on the treatment of
pigmented skin lesions such as tattoos, eyebrow tattoos, eyeliner, lip liner on exogenous
pigmented skin, and traumatic tattoos.

Before Treatment:
 Understand the previous treatment methods and check the skin condition to see if it is
suitable for systemic treatment.
 Patients who have been exposed to prolonged sun exposure before or who have had artificial
sunbathing within 48 hours are not acceptable for treatment.
 Patients with a history of herpes simplex in the area to be treated need to receive preventive
medication before surgery.
 Discuss treatment goals with patients.
 Strict and effective eye protection must be provided to patients. Such as gauze, eyelid mask,
etc.
 It is recommended to take pictures before and after the operation to record the treatment
process. Taking pictures provides an objective basis to prove the therapeutic effect, because
some patients cannot objectively judge the treatment process in the gradual therapeutic effect.
① Washing Eyebrows
During the treatment, the customer should keep his eyes closed. The operator selects the required
laser energy according to the color depth of the treatment area (adjust the energy value, the
recommended energy value for the new machine is 35%), and slowly move the handle from the
normal skin near the treatment area to the treatment area to let the customer has a psychological
acceptance process. At this time, the frequency can be set to 3Hz, and the head is 1-2 fingers away
from the treatment area. The treatment can be performed from the end of the eyebrow or the
eyebrow. If there is a phenomenon of color reversion within 5-10 minutes after treatment, it can be
washed again. Re-examination after one and a half months, if the pigment has not faded, the
second treatment can be performed(If the color becomes light and does not absorb energy, it can
be operated with activated carbon liquid to help absorb energy).
② Tattoo Removal
The frequency can be set to 3Hz-5Hz, and the distance between the tip of the handle and the
treatment area is 3-4 fingers, and the treatment is performed with high energy as close to the focus
point as possible. Common black and blue tattoo, choose 1064nm bald head treatment, in case of
red or coffee, choose 532nm bald head treatment, the treatment interval is 45-90 days, and the
treatment is cycled until it is washed (if the color becomes light and does not absorb energy, it can
be operated with activated carbon liquid. To help absorb energy).
③ Freckle Removal
Facial freckle can be treated with activated carbon. The frequency is set to 3Hz, the recommended
energy is 60%-80%, and the 1064nm high beam head is used. The head is 40cm away from the
skin for treatment. After finishing the whole face, if there are some areas with heavier spots, you
can skip the activated carbon and use the focus energy, but there should be no bleeding, just
slightly red. About 7 days after the operation, if the color becomes darker, it is recommended to
use a depigmentation cream to help decompose the pigment. (Focus: the point with the loudest
blasting noise.)
④ Mole Removal
The frequency can be set to 3Hz-5Hz, and the distance between the head and the treatment area is
3-4 fingers, and the treatment is performed with high energy as close to the focus point as possible.
Choose 1064nm bald head treatment, the treatment interval is 45-90 days, and the treatment is
cycled until it is washed (if the color becomes light and does not absorb energy, it can be operated
with activated carbon liquid to help absorb energy).
⑤ Pore Shrinking
Activated carbon powder must be used to treat shrinkage of pores. The frequency is set to
3Hz-5Hz, and the recommended energy is 60%. When the 1320nm head is used, the distance
between the head and the skin is 4cm, and the frequency can be set to 3Hz-4Hz. After finishing
treatment, there is still some heat inside, the pores are expanded by heat, and the effect is not
visible. It takes about 2 days to see better results.

6. Cautions
(1) After treatment, the skin is sensitive to heat, so avoid using hot water to clean the treatment
area when washing your face. You should use warm or cold water to clean the area. When washing,
the action should be as gentle as possible and do not rub hard.
(2) At the moment when the strong light acts during treatment, a large amount of free water on the
skin is lost, most patients will feel the skin is dry and dehydrated, so after treatment, it is necessary
to replenish water in time.
(3) During the recovery period, the treatment area should be kept dry, do not perform skin care, do
not make up and rubbing.
(4) Strenuous exercise should not be performed during the recovery period, so as to avoid
excessive sweating, causing skin infections or delaying the repair process.
(5) After treatment, apply ice or cold spray according to the severity of skin reaction.
(6) Photosensitivity foods and drugs are forbidden during treatment.
(7) The crusted skin during the recovery period will usually fall off on its own in about 7-10 days.
It cannot be peeled off by hand to avoid pigmentation or scars.
(8) Pay attention to sun protection during the recovery period and use umbrellas when going out.

7. Contraindications
(1) Menstrual period, pregnancy period, childbirth period, lactation period.
(2) Patients with diseases sensitive to light (such as psoriasis, vitiligo, eczema, etc.).
(3) People who are using light-sensitive drugs (such as tetracycline, quinolones, sulfonamides,
antidepressants, diuretics, hypoglycemic drugs, anti-inflammatory analgesics, female hormone
preparations, etc.).
(4) Exposed to the sun in the past 2-3 weeks.
(5) Patients with active herpes simplex.
(6) Diabetic patients.
(7) Scar constitution.
(8) Those with dry and sensitive skin.
In addition, inflamed and purulent wounds can only be treated after recovery. Avoid strong sun
exposure or outdoor SPA for 2-3 weeks before treatment. No microdermabrasion or fruit acid
peeling beauty items should be done 2-3 weeks before treatment . In short, if you have skin lesions
and take special drugs, you need to consult a doctor before starting the treatment.

8. Parameters
Laser Type YAG
Wavelength 1064nm, 1320nm, 532nm
Spot Site 1-5mm(adjustable)
Energy 10-1000Mj
Output Mode Pulse
Pulse Wide ≤500
Frequency 1-10Hz
Warning Temperature 45℃(adjustable)
Laser Power 500W
Input Power 1200W
Screen 10.4inch touch screen
Cooling System Water Cooling and Wind Cooling
Voltage AC220V±10% 15A 50-60Hz, 110v±10%25A50-60Hz

 

  • Indibeau Pico laser